Notifier Digital Fire Alarm Communicator

Notifier Fire Alarm Control Products

NOTIFIER offers a range of Digital Alarm Communicator/Transmitters, designed to transmit system status by point or zone, providing valuable information to a central station or service personnel.

Universal Digital Alarm Communicator

The compact, simple-to-use UDACT works with a variety of NOTIFIER's fire alarm control panels. The UDACT is designed to transmit system status by point or zone, providing specific information regarding the fire location to the fire department. The UDACT communicates to UL-listed central station receivers via the public switched telephone network.

• Conventional fire alarm panels available from 2 to 120 zones
• Control communicators from 3 to 4 inputs or optional UDACT plug-in for other systems
• Field Charging Power Supply (FCPS) available for powering ADA/UL1971 devices
• Optional slave voice evacuation panel —Model VEC-25/50
• Standard LED or 7-segment displays
• Releasing controls for deluge and agent release

411 Series Communicators

Fire•Watch 411 Series

The Fire•Watch 411 Series from NOTIFIER are compact, multifaceted, slave Digital Alarm Communicator Transmitters (DACTs) designed for a variety of fire, security, and non-fire applications.

411 and 411UD

The series consists of two models: the 411 and 411UD, providing three and four monitoring channels (inputs) respectively. These slave DACTs are a cost-effective solution for applications that require an existing (or new) Fire Alarm Control Panel to transmit system status to an off-site monitoring facility for Central or Remote Station compliance.

Due to extremely flexible programming options, the 411 Series slave DACTs are also ideal for monitoring non-fire and security control panels. With fifteen selectable transmission formats, including ADEMCO Contact ID, compatibility with virtually all Digital Alarm Communicator Receivers (DACR) is ensured. Programming can be accomplished on-site with a hand-held programmer (PRO-411), or remotely (411UD only) utilizing an optional PK-411UD Windows^®- based remote upload/download software package. The PK-411UD upload/download software also permits system interrogation and revision from a remote site.

411UDAC

The Fire•Watch 411UDAC is a compact, multifaceted, stand-alone or slave Fire Alarm Communicator designed for a variety of fire and non-fire applications. It provides four channels (inputs) that accept waterflow devices, two and four-wire smoke detectors, pull stations and other normally-open contact devices. The 411UDAC is a cost-effective solution for applications that require an existing (or new) Fire Alarm Control or Security Panel to transmit system status to an off-site monitoring facility for Central or Remote Station compliance.

Due to its extremely flexible programming options, the 411UDAC is also ideal for use as a stand-alone unit to monitor: sprinkler systems for waterflow and supervisory conditions; processes (i.e. water level, gas detection, loss of air flow); and normally-open contact devices. With fifteen selectable transmission formats, including ADEMCO Contact ID, compatibility with virtually all Digital Alarm Communicator Receivers (DACR) is ensured. Programming can be accomplished on-site with a hand held programmer (PRO-411) or remotely utilizing an optional PK-411UD Windows^® based remote upload/download software package. The PK-411UD upload/download software also permits system interrogation and revision from a remote site.

Series Features

• Three models available:
• 411 – Slave Communicator
• 411UD –Slave Communicator with up/download
• 411UDAC – Stand-alone Communicator with up/download
• Up to four input channels (3 on the 411)
• Fully programmable with PRO-411 or with Windows^® utility (up/download models)