Home Page - Koetter Fire Protection Koetter Fire Protection International
Koetter Fire Protection
Koetter Fire Protection
Koetter Fire Protection Company   |   Services   |   Products   |   FAQs   |   Locations & Contacts
Koetter Fire Protection
Koetter Fire Protection
Koetter Fire Protection Koetter Fire Protection

Notifier Fire Alarm Control Panels

Notifier Fire Alarm Systems & Fire Detection Systems


Fire Alarm Systems - Fire Alarm Control Panels - Notifier Alarm Panel - AFP-100 - by Koetter Fire Protection - Dallas, Texas

Notifier AFP-100

The AFP-100 is a compact, cost-effective, feature-packed, analog/addressable fire alarm control panel with a capacity of 198 NOTIFIER addressable devices. A single Signaling Line Circuit (SLC) loop supports up to 99 smoke detectors and 99 control or monitor modules. The panel uses surface-mount technology and is designed for ease of installation and programming.

The AFP-100 features the latest in fire protection technology, including: three levels of detector sensitivity settings, programming of inputs to two software zones, analog maintenance alert, and automatic detector test.

Intelligent 1-Loop Fire Alarm Control Panel Features

  • 198 intelligent device capacity,plus 103 programmable notification and relay circuits
  • 5.0 amps of signaling power expandable to 11.0 amps
  • Advanced intelligent features,such as pre-alarm,drift compensation, day/night sensitivity, maintenance alert, meets NFPA calibrated test
  • Can operate with untwisted, unshielded wire
  • Four independent releasing hazards
  • Fully field programmable from PC with VeriFire™ utility, or from front panel
  • Serial LCD, LED or graphic annunciators
  • Network option to NotiFireNet™

Fire Alarm Systems - Fire Alarm Control Panels - Notifier Alarm Panel - AFP200 - by Koetter Fire Protection - Dallas, Texas

Notifier AFP-200

The AFP-200 is NOTIFIER's premier small intelligent panel. The AFP-200 is a compact, cost-effective, intelligent fire alarm control panel with a capacity of 301 individually identified and controlled points and an extensive list of powerful features. The AFP-200 provides capabilities that exceed most large intelligent systems, at a cost comparable to conventional control panels.

The AFP200 can address 198 addressable devices of multiplexed detection and control, plus 103 programmable notification and relay circuits. It is fully field programmable without special tools or need of a laptop computer, and provides fire protection while being programmed. The basic configuration features a full 80 character backlighted liquid crystal display, event history in non-volatile memory, and can automatically test smoke detectors to conform to the NFPA 72 calibrated sensitivity testing for fire alarm systems. It is capable of controlling four independent releasing zones for the control and supervision of FM-200, Inergen, FE-13 or pre-action sprinkler fire suppression systems.

Intelligent 1-Loop Fire Alarm Control Panel Features:

  • 198 intelligent device capacity, plus 103 programmable notification and relay circuits
  • 5.0 amps of signaling power expandable to 11.0 amps
  • Advanced intelligent features, such as pre-alarm, drift compensation, day/night sensitivity, maintenance alert, meets NFPA calibrated test
  • Can operate with untwisted, unshielded wire
  • Four independent releasing hazards
  • Fully field programmable from PC with VeriFire™ utility, or from front panel
  • Serial LCD, LED or graphic annunciators
  • Network option to NotiFireNet™

Fire Alarm Systems - Fire Alarm Control Panels - Notifier Alarm Panel - Onyx™ 640 - by Koetter Fire Protection - Dallas, Texas

Notifier Onyx™ 640

Expandable, network-able and scalable, the NFS-640 is also designed for backward compatibility. It's easier to program and offers three display options.

NOTIFER'S flexible Onyx 640 fire alarm control panel offers faster polling and response time by utilizing NOTIFIER's Flash-Scan(TM) technology. This new SCL protocol features increased loop capacity for up to 318 devices, allowing the systems response time to exceed worldwide code requirements.

The Onyx 640 comes standard as one loop but easily expands to two, and easily accommodates future expansion needs. The NOTI-FIRE-NET Web Server is designed to offer facility manager's remote viewing to their NOTI-FIRE-NET network of fire alarm control panels. Via the Internet or an Intranet, facility mangers can now conveniently access information on their panels directly from their computers. The system's user-friendly graphical interface allows operators easy viewing of the event history of a fire alarm control panel and tracking a system's status, device properties, and other information.

Small commercial facilities, high-rise buildings, campus complexes each have their own special requirements for a fire detection system - and they're all met by the 640 fire alarm control panel, first of the new Onyx series of fire detection products.

Intelligent 1 to 2 Loop Fire Alarm Control Panel Features:

  • One Signaling Line Circuit (SLC), expandable to two
  • 318 devices per SLC (159 detectors and 159 modules), 636 devices per panel or network node
  • 80-character, 640-character, or displayless (network node)operator interface options
  • Complete intelligent system feature set with digital protocol, 9 levels of sensitivity, drift compensation and maintenance alert, and auto detector test
  • NAC (Notification Appliance Circuits). Selectable System Sensor strobe synchronization
  • Built-in Alarm, Trouble, and Supervisory relays
  • Up to 64 output circuits per FACP or network node; circuits programmable
  • Fully field programmable with 80-character display (includes QWERTY keypad)or offline with VeriFire™ Tools Windows-based program utility
  • Unique environment Detection includes VIEW® for clean environments, HARSH™ for dirty environments, and Acclimate Plus™ a multi sensor that adjusts
  • sensitivity automatically
  • Optional integrated voice and firefighters telephone
  • Sophisticated releasing capabilities with 10 hazard areas, abort, delay and discharge timers, and cross zoning
  • Full line of power supply options, both internal including remote and models with built-in strobe synchronization
  • Optional LED, LCD and graphic annunciators

Fire Alarm Systems - Fire Alarm Control Panels - Notifier Alarm Panel - AFP-400 - by Koetter Fire Protection - Dallas, Texas

Notifier AFP-400

The AFP-400 are compact, cost-effective, intelligent fire alarm control panels with a total capacity of up to 563 points and an extensive list of powerful features. The AFP-400 integrates conventional output circuits, such as notification, telephone, and speakers, with the intelligent features of one or two signaling line circuits (SLC) and 198 or 396 intelligent/addressable points.

The AFP-400 is also capable of controlling independent releasing zones for the control and supervision of FM-200, Inergen, FE-13 or pre-action sprinkler fire suppression systems.

Voice and Fire Fighters Telephone System

The AFP400 can be fully equipped with emergency voice paging, message playback, and fire fighters telephone systems. Common configurations include single, dual, or triple channel voice with full amplifier backup, manual override of automatic messages. When combined with the AM-2020 control panel or other control panels such as the AFP-200, the AFP-400 is capable of distributed voice and firefighters telephone.

Networked Fire Alarm Systems

Transponders, AM-2020, AFP-200 and AFP-400 control panels can be connected to the built-in networking standard to the Notifier family of addressable control panels, and the resulting networked fire alarm system can address even more points. With networking, huge fire alarm systems can be constructed for an entire high rise or a cluster of buildings. And the resulting system will be listed with UL 1076 for security systems as well.


Fire Alarm Systems - Fire Alarm Control Panels - Notifier Alarm Panel - AFP1010 - by Koetter Fire Protection - Dallas, Texas

Notifier AFP1010

The NOTIFIER AFP1010 is an addressable fire alarm control panel with the capacity for 792 individually identifiable and controllable detection/control points which is also network-able. The modular hardware design and easy-to-define system operation software allows the user to easily configure the AFP1010 in the field. This system has optional voice and telephone and remote Data Gathering Transponders.

A NOTIFIER AFP1010 system also protects the U.S.S. Constitution Museum, which is located about 200 yards from the battleship in the Charlestown Navy Yard in Boston, Massachusetts. The AFP1010 panel on the U.S.S. Constitution warship was installed as part of a four-year, $12 million rehabilitation and restoration project.

Intelligent 1-To 10-Loop Fire Alarm Control Panels Feature:

  • Point capacity: 396 detectors (ion, photo, multi or duct)and 396 modules (relay, NAC or monitor)
  • Fully field programmable from built-in keypad or CRT, or off line with VeriFire Windows-based software utility
  • 80-character, back-lit display
  • Network option with support of over 100 nodes
  • Serial LED, LCD and graphic annunciators
  • 400-event history buffer
  • 6.0 amps power supply with expansion in 6.0 amp increments and optional 6.0 amp field charging power supply
  • One-man walk-test with report of misaddressed devices
  • Powerful boolean logic equations (and, or, not, cross, delay, time/date)

Fire Alarm Systems - Fire Alarm Control Panels - Notifier Alarm Panel - AM2020 - by Koetter Fire Protection - Dallas, Texas

Notifier AM2020

The AM2020 is the work horse of the NOTIFIER line. Undoubtedly considered best in the industry, the AM2020 can support from one to ten intelligent Signaling Line Circuits (SLCs) which monitor up to 1,980 intelligent devices. This system can be networked, has optional integrated voice and telephone and remote Data Gathering Transponders. This system continues to be the industry leader in large facility protection.

A robust system, the AM2020 can address 1,980 addressable points of multiplexed detection and control. It is fully field programmable without special tools or need of a laptop computer, and provides fire protection while being programmed. The basic configuration features a full 80 character backlighted liquid crystal display, 400 event history in non-volatile memory, and can automatically test smoke detectors to conform to the NFPA 72 calibrated sensitivity testing for fire alarm systems.

The AM-2020 can be fully equipped with emergency voice paging, message playback, and fire fighters telephone system. Common configurations include single, dual, or triple channel voice with full amplifier backup, manual override of automatic messages. When combined with transponders or stand alone satellite control panels, the AM-2020 is capable of distributed voice.

Networking

Transponders, AFP-400 fire alarm control panels, or AFP-200 systems can be connected to the built-in networking that is standard to the AM-2020 fire alarm system, and the resulting networked system can address even more points. Built-in networking is standard on all Notifier control panels as a standard feature. The Notifier AM-2020 panel is listed with UL 1076 for security systems as well.

Connecting Fire Suppression Systems

The AM2020 is also capable of controlling numerous independent releasing zones for the control and supervision of FM-200, Inergen, FE-13 or pre-action sprinkler fire suppression systems.

Intelligent 1-To 10-Loop Fire Alarm Control Panels Feature:

  • Point capacity: 990 detectors (ion, photo, ulti or duct) and 990 modules (relay, NAC or monitor)
  • Fully field programmable from built-in keypad or CRT, or off line with VeriFire Windows-based software utility
  • 80-character, back-lit display
  • Network option with support of over 100 nodes
  • Serial LED, LCD and graphic annunciators
  • 400-event history buffer
  • 6.0 amps power supply with expansion in 6.0 amp increments and optional 6.0 amp field charging power supply
  • One-man walk-test with report of misaddressed devices
  • Powerful boolean logic equations (and, or, not, cross, delay, time/date)

Fire Alarm Systems - Fire Alarm Control Panels - Notifier Alarm Panel - Onyx™ 3030 - by Koetter Fire Protection - Dallas, Texas

Notifier Onyx™ 3030

The NFS-3030 is an intelligent Fire Alarm Control Panel designed for medium- to large-scale facilities. Fire emergency detection and evacuation are extremely critical to life safety, and the NFS-3030 is ideally suited for these applications. The NFS-3030 is part of the ONYX Series of products from NOTIFIER.

The NFS-3030 is ideal for virtually any application because it features a modular design that is configured per project requirements. With one to ten Signaling Line Circuits (SLCs), the NFS-3030 supports up to 3,180 intelligent addressable devices. Information is critical to fire evacuation personnel, and the NFS-3030s large 640-character Liquid Crystal Display (LCD) presents vital information to operators concerning a fire situation, fire progression, and evacuation details.

A host of other options are available, including single- or multi-channel voice; firefighters telephone; LED, LCD, or PC-based graphic annunciators; fire or integration networking; advanced detection products for challenging environments, and many additional options.

Intelligent 1-To 10-Loop Fire Alarm Control Panels Features:

  • 1-10 Signaling Line Circuits Style 4, 6 or 7
  • Point Capacity:Up to 159 detectors (any ix of ion, photo, laser photo, thermal, or ulti-sensor)and 159 modules (N.O.manual stations, two-wire smoke, notification, or relay)per SLC
  • Large 640-character LCD backlit display (16 lines x 40 characters)or displayless (a node on a network)
  • NOTIFIRENET ™ compatible
  • UniNet ™ compatible
  • Built-in Alarm, Trouble, Security, and Supervisory relays
  • Up to 96 input or output panel circuits per FACP or network node; circuits configurable online
  • Application code is saved in Flash memory, eliminating the need to change EPROMs
  • Built-in Degraded Mode option. In the event of a CPU failure the loop control modules will continue to monitor fire alarm conditions
  • Weekly Occupancy Schedules allow changing sensitivity by time of day and day of week
  • Optional universal 2040-point DACT
  • EIA-485 annunciators, including custom graphics
  • Printer interface (80-column and 40-column printers)
  • History file with 4000-event capacity in nonvolatile memory, plus separate 1000-event alarm-only file
  • Advanced history filters allow sorting by event, time, date, or address
Custom Engineered Fire Systems . . .

. . are required by businesses in the data processing, communications, aviation, medical & art industries.

Koetter Fire Custom Engineered Fire Systems! Koetter Fire specializes in Semiconductor Facilities, Cleanrooms & Wet Bench fire protection, as well as all other industrial applications. Prevent the loss of costly equipment, irreplaceable data and information as well as business interruption.
"Custom Engineered Fire Systems & Rates"

TraceTek Leak Detection from Koetter Fire
TraceTek Leak Detection from Koetter FireDesigned primarily to detect water leaks in computer facilities, TraceTek has become the standard for uses such as hazardous chemical supply and recovery in semicon-ductor production facilities, hazardous fluid monitoring & the monitoring of the interstitial space between the inner and outer wall of double containment piping systems.   more about TraceTek
Fire Protection Systems Authorized Distributor

. . . of fire detection & suppression systems manufactured by the biggest and best industry names.

Our people are factory-trained in the design, installation, and service of these manufacturers' systems.
Fire Protection Systems Authorized Distributor
Koetter Fire Protection Offices: Dallas TX, Austin TX, Houston TX, San Antonio TX, Longview Texas
Copyright © 2012 Koetter Fire Protection LLC - All Rights Reserved.
Koetter Fire Protection