Home Page - Koetter Fire Protection Koetter Fire Protection International
Koetter Fire Protection
Koetter Fire Protection
Koetter Fire Protection Company   |   Services   |   Products   |   FAQs   |   Locations & Contacts
Koetter Fire Protection
Koetter Fire Protection
Koetter Fire Protection Koetter Fire Protection

Ansul Class D - Dry Powder Fire Extinguisher Model 30

Ansul Portable Extinguishers for Class D Fires

Ansul Fire Extinguishers- Class D Extinguisher- Dry Powder Fire Extinguisher- distributed by Koetter Fire Protection - Dallas, Texas

Ansul Red Line Model 30 (1-MX-30-G)

The Model 30 is recommended wherever large, intense fires often occur and maximum fire-killing power is needed. Typical applications include warehouses, paint-mixing areas, fuel loading racks, fuel storage locations and heavy construction sites.

Available Ansul Agents

  • MET-L-X® – a sodium chloride-based dry powder for use on most Class D fires involving combustible metals such as magnesium.
  • NA-X® – a sodium carbonate-based dry powder for use on most Class D fires involving sodium, potassium and sodium-potassium alloy (NaK) materials. NA-X agent is recommended wherever stress corrosion of stainless steel must be kept to an absolute minimum.

Refer to the column below for the specific class of extinguisher within this category (i.e., Multi-Purpose Dry Chem, Regular Dry Chem, Purple-K, etc.


Model 1-MX-30-G
Class D
Class D
Agent Capacity 30 lb (13.6 kg)
27 lb (12.3 kg)
Discharge Time 23 seconds 17 seconds
Effective Range 8 ft  (2.4 m) 8 ft  (2.4 m)
Agent Flow Rate 1.19 lb/sec
(.53 kg/sec)
1.44 lb/sec
(.65 kg/sec)
Charged Weight (with agent) 54½ lb   (24.7 kg) 51 lb   (23.4 kg)
Dimensions Height: 22-1/2 in. (57.2 cm)
Width: 11-1/8 in. (26.3 cm)
Depth: 8 in. (20.3 cm)
Low Temperature Model
to –65° F (–54° C)
Corrosion Control Coating NA NA
High Flow Nozzle NA NA
Multi-Purpose Bracket†† 14098 14098
Heavy Duty Bracket†† 30889 30889
Heavy Duty Ring Pin Bracket†† 25428 25428
Listings/Approvals U.L. U.L.
 ** Refer to nameplate
*** Not applicable
 †† Corrosion resistant epoxy painted brackets also available
Custom Engineered Fire Systems . . .

. . are required by businesses in the data processing, communications, aviation, medical & art industries.

Koetter Fire Custom Engineered Fire Systems! Koetter Fire specializes in Semiconductor Facilities, Cleanrooms & Wet Bench fire protection, as well as all other industrial applications. Prevent the loss of costly equipment, irreplaceable data and information as well as business interruption.
"Custom Engineered Fire Systems & Rates"

TraceTek Leak Detection from Koetter Fire
TraceTek Leak Detection from Koetter FireDesigned primarily to detect water leaks in computer facilities, TraceTek has become the standard for uses such as hazardous chemical supply and recovery in semicon-ductor production facilities, hazardous fluid monitoring & the monitoring of the interstitial space between the inner and outer wall of double containment piping systems.   more about TraceTek
Fire Protection Systems Authorized Distributor

. . . of fire detection & suppression systems manufactured by the biggest and best industry names.

Our people are factory-trained in the design, installation, and service of these manufacturers' systems.
Fire Protection Systems Authorized Distributor
Koetter Fire Protection Offices: Dallas TX, Austin TX, Houston TX, San Antonio TX, Longview Texas
Copyright © 2012 Koetter Fire Protection LLC - All Rights Reserved.
Koetter Fire Protection