|
Utilizes the cooling, soaking and penetrating effect of a 45-55 ft. stream of water. Very effective for inexperienced operators for use as a Class A fire extinguisher. Alcohol Resistant fire agent is effective on Class B fires in a wide variety of materials such as alcohols, polar solvents, hydrocarbons & combinations such as gasohol. |
 |
The ultimate class A fire extinguisher, especially where a potential Class C (electrical) fire hazard exists. The fine spray from the unique misting nozzle provides safety from electrical shock, greatly enhances the cooling and soaking characteristics of the agent and reduces scattering of the burning materials.
|
 |
Wet Chemical fire extinguishers are the best for common restaurant & kitchen fire hazards. Tested and approved for the new Class K listing by UL specifically for restaurant kitchen hazards. They contain a special potassium acetate based, low PH agent developed for use in pre-engineered restaurant kitchen systems. |
 |
Regular dry chemical fire extinguishers contain a siliconized sodium bicarbonate based dry chemical with free flowing and non-caking additives. Economical Class B & C protection with lower initial cost and recharging. This chemical smothers fires in flammable liquids & pressurized gases and is electrically nonconductive. |
 |
Multipurpose dry chemical or ABC fire extinguishers contain a specially fluidized and siliconized mono ammonium phosphate chemical. It chemically insulates Class A fires by melting at approximately 350°F, coating the surface to which it is applied. It smothers & breaks the chain reaction of Class B fires and will not conduct electricity.
|
 |
Purple K fire extinguishers contain specially fluidized & siliconized potassium bicarbonate dry chemical which is particularly effective on Class B flammable liquids and pressurized gases, and it is electrically nonconductive. Choice of the oil, gas, chemical and utilities industries as the preferred fire-fighting agent.
|
 |
Carbon Dioxide is discharged as a white cloud of "snow" which smothers a fire by eliminating its oxygen. It is effective for CO2 is a clean, non-contaminating, odorless gas, safe for use on clothing, equipment, valuable documents or food.
|
 |
Halotron I is a "Clean Agent" HydroChloroFluoroCarbon discharged as a rapidly evaporating liquid which leaves no residue. It effectively extinguishes Class A and B fires by cooling and smothering and it will not conduct electricity back to the operator. Halotron is pressurized with Argon gas and is an EPA and FAA approved HCFC blend B agent approved for use on Class A, B and C fires. |
 |
High Performance fire extinguishers are the ultimate choice for high hazard, frequent use and extreme environment applications. Chemical and petro-chemical,
oil and gas, mining, marine, transportation, utilities, primary metal and similar industries can all benefit from the presence of these rugged, quick-response extinguishers. |
 |
Suitable for use on metal fires, the Class D fire extinguisher incorporates a soft flow extension applicator that ensures the operator's hands are kept away from the extreme heat, preventing inhalation of the toxic fumes caused by the burning metal. |
For more information about Commercial-Grade Hand Portable Fire Extinguishers, contact your nearest Koetter Fire Protection office today!
|
